HOSKIN

Product Categories

Manufacturiers

Carottiers diamantés série Millenium

  • Manufactured by: Husqvarna


Ask a Question

Product Description:

Top quality bits designed for medium to large jobs providing best performance and lowest cost per hole. Bits are available in three quality ranges for all applications, including concrete, brick, block and asphalt.

Type

Description

5500 Crown

For fast cutting of concrete with soft to hard aggregate and light medium steel reinforcing.

F5500 FC

For the fastest possible drilling on critically hard materials like concrete with heavy reinforcing. Effective on granite, marble and other stone material.

F5500 HR

For fast drilling in flint, chert and other hard aggregates with steel reinforcing. Good for fast general purpose drilling of any aggregate.

F5500 Standard

Has the longest life and lowest cost per hole when drilling a wide range of critically hard materials with steel reinforcing. Also for brick and block.

5400 Bolt-On

For drilling cured, reinforced concrete with medium to hard aggregates and medium to heavy steel reinforcing.

F5400 FC

The bit is for extremely fast drilling of medium-hard to hard concrete with heavy steel.

F5400 Medium

The bit is for drilling cured concrete with medium to soft aggregates with or without steel reinforcing.

5400 Precast

For wet drilling precast, cured abrasive concrete. Very long life.

F5400 Prestressed

The bit is for drilling prestressed concrete and concrete with stressed rebar.

F5400 Soft

The bit is for fast drilling of medium-hard to hard concrete with heavy steel.

5400 Solid Back

For drilling cured, reinforced concrete with medium to hard aggregates and medium to heavy steel reinforcing.

5400 Series Large Diameter

For drilling cured, reinforced concrete with medium to hard aggregates and medium to heavy steel reinforcing.

5400 Turbo

For fast drilling of medium hard to hard concrete with heavy steel

F5300 Hard

The bit is for asphalt and concrete with soft, abrasive aggregate. Also for drilling air-cured refractories.

F5300 Medium

The bit is for good balance of speed and life when drilling medium-hard to hard concrete with medium to heavy steel reinforcing.

F5300 Soft

The bit is for drilling critically hard concrete with heavy steel.